Why Choose Ziptrack

ZipTrack™ Products

Why Choose Us

Environmentally Friendly
LEED Certified
AAMA 2604 Compliant
LIMITED LIFETIME WARRANTY

CONTACT US TODAY

Please feel free to contact us anytime and a member of out sales staff will get back to you right away!
  • 800-783-1331
  • sales@elitefence.com
  • 50925 Richard W Blvd
    Chesterfield Twp., MI 48051
GET A QUOTE
cantilever4

Why Choose ZipTrack™?

ZipTrack™ Aluminum Cantilever Slide Gate

As manufactured by Elite Fence Products, Inc. shall conform to the following specifications: FS RR-191/2D Type III & IV and ASTM F 1184-88.

 

FULLY FABRICATED GATE

ZipTrack LogoThe gate shall be fabricated in Elite Fence Product’s Plant. The frames and tracks are fabricated from extrusions (6005-T5). The upper track weighs 5.816# per foot and lower 3.331# per foot. The upper and lower tracks shall be welded and/or bolted to 2″ x 2″ x .125 Wall tubes at 1.106# per foot vertical framing. Each section for the tail shall be X-braced with two (2) 2″ x 2″ x .125 Wall tubes at 1.106# per foot. Each front section shall have one (1) 1″ x 2″ tube at .824# per foot diagonal brace for ornamental gates, and (1) 2″ x 2″ x .125

 

Wall tube at 1.106# per foot diagonal brace for chainlink gates. Gates made for chainlink may be shipped with the wire in place or the wire can be installed at the job site. The fabric shall be held in place by tension bars, tension bands and bolts. Barbwire shall be held in place by brace bands and bolts.

 

ORNAMENTAL PICKET TYPE GATES

The upper track will have holes punched to accepted 1″ x 1″ x .062 wall picket, the pickets shall be attached by using 410 stainless steel screws. The heads are coated with zinc and yellow chromate, and then painted to match the color of the gate. All gates are manufactured with no picket through bottom to meet UL 325.

 

TRUCK ASSEMBLY

Two (2) swivel type truck assemblies consisting of a solid steel zinc plated body, utilizing a 3/4″ mounting stud. Each having two (2) axles press fitted to the main body. The axles are then press fitted with four (4) permanently lubricated sealed ball bearing wheels mounted vertically for rolling the gate. Two (2) top mounted steel horizontal rolling wheels with sealed bearings are used for alignment.

 

LOWER GUIDES

Two permanently lubricated sealed ball bearing wheels are mounted to the gate post and should be vertically centered in the lower track. All brackets and gate latches shall be galvanized after fabrication.

Single Gate Opening Double Drive Opening
ZipTrack™ Single Track 4’-30’ 8’-60’
ZipTrack™ Dual Track 31’-40’ ** 62’-80’ **
ZipTrack™ Box Frame 41’-60’ ** 82’-120’ **
Heights Colors
ZipTrack™ Ornamental Gates 3’ High-10’ High Black,White,Quaker Bronze, Hartford Green, Walnut Brown, Beige, Sandstone *
ZipTrack™ Frame Only 4’ High-12’ High Mill Finish, Black, White, Quaker Bronze, Hartford Green, Walnut Brown, Beige, Sandstone *
ZipTrack™ Frame Only Plus Barb 6’+1’ High-12’+1’ High Mill Finish, Black, White, Quaker Bronze, Hartford Green, Walnut Brown, Beige, Sandstone *